AMPHIBICO Dive Buddy EVO HD Elite, Инструкция по эксплуатации

Страница: 18 / 25

MAINTENANCE
WARNING: DO NOT leave the housing exposed to direct sunshine, as extreme heat
condition can be detrimental to certain of its components.
1. Keep housing and o-rings away from direct sunlight. Always store unit when possible away
from direct sunlight as this can dry out and crack o-rings in the housing. Ultraviolet rays can
damage plastics, paint and o-rings.
2. Always rinse or soak closed housing in fresh water for 10 to 15 minutes after every use.
Reach into freshwater and operate all controls to clear salt water. Do not use solvents to clean
unit. If preferred, use mild detergent and clean fresh water.
3. Fasteners that are removable should occasionally have the threads lubricated with silicon
grease.
4. Rinse clean and remove water spots from external filters and lens surface after every dive or
water spots may build up and become impossible to remove. Dry gently with a soft, lint-free
cloth.
5. Inspect housing's rear door main o-ring seals (double seals) before every dive. Make sure
that there are no cracks or misalignment in the o-ring channel and that no debris is caught on
the o-rings.
www.amphibico.com