AMPHIBICO Dive Buddy EVO HD Elite, Инструкция по эксплуатации

Страница: 10 / 25

Placing the Camera in the housing
1. Before engaging the camera into to the
housing, connect the hydrophone cable
(biggest) from inside the housing to the
microphone jack of the camera .
2. Engage the camera with saddle into to the
housing about one inch into its track. Connect
the video cable from the rear monitor inside the
housing to the A/V OUT jack of the camera.
3. Before completely inserting the camera, grab
the LANC cable (smallest) from inside of the
housing and connect it to the REMOTE jack of
the camera.
4. The camera will be secured into place once
the locking latch is engaged.
Rear LCD Monitor
Its is recommended to place four fresh "AA"
batteries into the battery holder before every
dive.
Operating limit: Typical alkaline batteries will
produce up to 30 minutes of continuous use.
Nickel metal hydride batteries (NiMH), on
the
other hand, will produce up to 150 minutes.
The "LOW BATT." indicator starts to flash red
once the batteries have reached their operating
limit. A steady red color indicates that the
batteries need to be replaced.
www.amphibico.com