AMPHIBICO Dive Buddy EVO HD Elite, Инструкция по эксплуатации

Страница: 9 / 25

Opening the Housing
1. Sit the housing on a flat surface. Press and rotate the rear door latch counterclockwise until
the door is
open.
2. Removing the saddle: Push the
saddle locking latch (a) inwards to
release the saddle from the housing.
Once released, slide the saddle out the
housing (b).
Setting the camera
1. Put a fully charged battery in the
camera.
(SONY® NP-FM50 or SONY® NP-QM71D)
2. Place a recordable disc into the camera
(for HDR-UX1 only).
3. Place a memory stick into the camera.*
4. Turn camera ON
5. In order to show the camcorder's indicators on the
LCD monitor, you must set the camcorder's "DISP
OUTPUT" to "V-OUT/PANEL".
* Failure to do so will cause LED indicators on electronic grip
to malfunction (see p. 12)
installing the saddle
1. Attach the camera saddle onto the bottom
of the camera via the tripod mounting screw.
Tighten the mounting screw into the rear
tripod receptacle of of the camera. Use a flat
screwdriver or coin to tighten the thumbscrew.
Sit the assembly on a flat surface.
www.amphibico.com