Amphenol T009-5030 Series Скачать руководство пользователя

Страница: 6 / 16

Amphenol Network Solutions

509.926.6000 – amphenol-ns.com

100A Dual-Feed

Breaker Panel

1.2 Inspection

ALERT! Only qualified personnel may install and maintain this product. Verify all connections

meet requirements specified in local codes or operating company guidelines before supplying

power. Protect this equipment with a fuse or breaker sufficient to interrupt power levels specified

under “Electrical Specifications.”

Please read these instructions carefully before beginning installation. If you need assistance, call

Amphenol Network Solutions Technical Support at 509-926-6000 or email us at getinfo@amphenol-

ns.com.

Inspect equipment after unpacking and compare it to the packing list.

Immediately report any shipping damage, defects or missing parts to Amphenol Network Solutions at

509-926-6000. Keep all documentation that comes with your shipment.

Amphenol Network Solutions is not liable for shipping damage. If the product is damaged, notify the

carrier and call Amphenol Network Solutions at 509-926-6000 for further recourse.

NOTE:

For service or warranty information, please visit our website at amphenol-ns.com and click on the

“Support” tab, email us at [email protected] or phone us at 509-629-6000.

Содержание T009-5030 Series

















Результаты поиска

Содержание T009-5030 Series

Отзывы:

Похожие инструкции для T009-5030 Series

Бренды по названию

Популярные бренды

Amphenol T009-5030 Series, Руководство по установке

Результаты поиска

Содержание T009-5030 Series

Отзывы:

Похожие инструкции для T009-5030 Series

Бренды по названию

Популярные бренды