H4 CABLE SERIES INSTRUCTION MANUAL
文件编号
(File Name) :WI-S037-ENG REV.L
13
www.amphenol-sustainable.com
7.
存储注意事项：
Note on storage
：
我们建议连接器零件的存储温度为
-30
℃
-+60
℃，相对湿度低于
70%
。连接器零件不能暴露在因直接降雨、冷凝等带来的水汽中。确保零件不能与酸、碱、瓦斯、
丙酮或者任何其他会影响材料使用的化学物质接触。如果以上条件得到满足，连接器的零件存储时间长达两年时间。
We recommend that you store connector components at temperature between-30
℃
to +60
℃
and with a relative humidity of less than 70%.The components
must not be exposed to moisture due to direct rainfall ,condensation .etc ,Ensure that the individual components do not come into contact with acids, alkalis, gases,
acetone or any other chemical substance that could impact the materials use .If these condition are met. The components can be stored for a maximum period of
up to two years from the date of manufacture.
Final interpreation is owned by Amphenol
8
.
注意事项：
Note
：
请注意，有关第三方测试仅作为应用设计的参考，客户有责任自行验证在特殊应用及极端环境条件下的系统功能和连接器的耐久性， 我们建议客户在设计应用系统
时，考虑预留充足安全系数，以避免高电流情况下引起产品过热失效。
Please be aware that this 3rd party laboratory test just as a reference for application design. It’s customer’s responsibility to validate system functions and
connector durability at specific application and extreme environment conditions. We recommend customer to consider margin in application design to avoid
overheat in high current situation.
