5.
电缆状态
:
Cable routing
电缆根部建议保留
20mm
未折弯长度，以免因线缆折弯产生的外力引起连接器密封件变形
.
如图
5.1
和图
5.2
。
In order to avoid the cable bend force lead to a visible deformation in the sealing portion of the insulation, the cable need keep at least 20mm straight length.
See picture 5.1 and 5.2.
电缆最小弯曲半径请参考电缆生产厂商详细要求。
Refer to cable manufacturer’s specification for minimum bending radius of cable.
图
5.1
Picture 5.1
图
5.2
Picture 5.2
图
6.1
Picture 61
图
6.2
Picture 6.2
6.
连接器对插前防尘保护
:
connector dust protection before mating:
连接器安装过程中，如未能及时对插公母头连接器，需要用防尘帽（母头使用
UTXPF
，公头使用
UTXPM)
组装保护，以防止连接器内部被污染。如图
6.1
和图
6.2
。
In the process of connector assembly, the connect need be protected by dust cap (female end use UTXPF and male end use UTXPM) if connector can't be
mated in time, so as to prevent the internal of connector be
contaminated. See picture 6.1 and 6.2.
H4 CABLE SERIES INSTRUCTION MANUAL
文件编号
(File Name) :WI-S037-ENG REV.L
12
www.amphenol-sustainable.com
20mm
20mm
Final interpreation is owned by Amphenol
