10
安费诺提供蓝色扳手
(H4TW0001)
和解锁工具
(H4TU0000)
用于安费诺
H4
系列连接器连接器的解锁
,
如图
4.2.1
及图
4.2.2
。
Amphenol specified wrench tool (H4TW0001) or Universal tool (H4TU0000) should be used in this step for H4 series. See below picture 4.2.1 and 4.2.2.
H4-H
连接器可直接用手打开。
The H4-H can be disconnected by hand.
图
4.2.1
Picture 4.2.1
图
4.2.2
Picture 4.2.2
万能解锁工具解锁
Universal Tool Disconnect
蓝色扳手解锁
Wrench Tool Disconnect
H4 CABLE SERIES INSTRUCTION MANUAL
文件编号
(File Name) :WI-S037-ENG REV.L
www.amphenol-sustainable.com
4.2)
连接器对插及解锁
Connector mating and un-mating
公端和母端连接器对插直到听到
“
滴
“
的卡位声说明对插到位。安费诺
H4
连接器符合
NEC 2008 690.33
标准
,
所以需要工具进行解锁。
For mating, align the 2 half connectors and mate them together by hand until a “click” is heard and/or felt. For un-mating, since the Amphenol H4 complies with the NEC 2008 690.33,
a tool is required to disconnect the connector once mated.
以下特征可以确认连接器是否对插到位：
Below feather can confirm the connector has been good mated or not
：
1.
卡扣卡到位如下第一点。
/ The latch was hookup as below point one.
2.
密封圈在外部不可看见。
/ O-ring pressed inside and invisible.
3.
公头和母头之间仅可有小的间隙(间隙≤
0.3mm
）。
/ There is very small gap between the interface of male and female
（gap≤
0.3mm
）
.
2
3
1
Final interpreation is owned by Amphenol
