Ampcontrol ABCM, Руководство пользователя

Страница: 7 / 26

ABCM CHARGER USER MANUAL
11/03/2020 9:25
Page 7 of 19
Ampcontrol Electronics Pty Ltd
– ABN 35 000 770 141
ABCM Battery Charger User Manual
MAG-212, Rev 5
– March/2020
2
RECEIVING AND STORAGE
2.1 Receiving
All possible precautions are taken to protect the equipment against damage or losses during shipment,
however before accepting delivery, check all items against the packing list or bill of loading. If there are
shortages or evidence of physical damage, notify Ampcontrol immediately.
Notify Ampcontrol within 7 days (maximum) in case of shortages or discrepancies, according to the
packing list. This action will help ensure a speedy resolution to any perceived problems. Keep a record
of all claims and correspondence. Photographs are recommended.
Where practicable do not remove protective covers prior to installation unless there are indications of
damage. Boxes opened for inspection and inventory should be carefully repacked to ensure protection
of the contents or else the parts should be packaged and stored in a safe place. Examine all packing
boxes, wrappings and covers for items attached to them, especially if the wrappings are to be discarded.
2.2 Inspection
Equipment that is found to be damaged or has been modified away from its published specification must
not be used. Please contact Ampcontrol if the equipment is suspected to be different than that ordered
or if it does not match the published specifications.
2.3 Storage after Delivery
Where equipment is not to be installed immediately, proper storage is important to ensure protection of
equipment and validity of warranty. All equipment should be stored indoors protected from the elements
in a cool dry area. If storing on the ground, ensure that the storage area is not an area where water will
collect.
When applicable, the correct handling and fork lift procedures must be in place to ensure that any crates
and pallets are moved safely.
2.4 Unpacking of Equipment
The method of packing used will depend on the size and quantity of the equipment. The following
cautions should be interpreted as appropriate.
CAUTION!
Take care when unpacking crates as the contents may have shifted
during transport.
The disposal of packaging materials, replaced parts, or components
must comply with environmental restrictions without polluting the
soil, air or water.
Ensure that any timber and cardboard used as packaging is disposed
of in a safe and environmentally responsible manner.
Where possible, dispose of all waste products i.e. oils, metals, plastic
and rubber products by using an approved recycling service centre.