Amos AEM 460, Руководство по эксплуатации, Страница: 23 / 31

AEM460 Semi-automatic Microtome
AMOSAEM460OP20180306
---18---
●
After sectioning, place the specimen clamping system on the upper position and lock it. Take out the
blade and put it in the case box when it is not in use.
5
、
Clearance
& Maintenance
5.1 Cleaning the instrument
⊙
cleaning the appearance
Use the wet cloth to clean the areas always be touched when operate the instrument,
for example the handle and the base holder locking lever and the storage area on the crust.
Use the dry cloth to clean the other appearance.
⊙
cleaning the clamp
Specimen clamp
Position (1) which is often touched when
operating, and position (2) which is often contacted
with the specimens, especially position (2) are very
easy to be polluted, so need to be cleaned frequently
to ensure ordinary operation.
Quick release cassette clamp
Position(3) which is often touched when
operating and position (4) which is often contacted
with the specimens, especially position (4) are very
easy to be polluted, so need to be cleaned frequently
to ensure ordinary operation.
⊙
Cleaning the knife holder
Take down all the parts of the knife holder as it
is showed in the picture and then cleaning all the
parts separately especially the following easily
polluted parts: the slider, lever, blade clamp and
the joint of the parts. And remember to clean the
blade clamp every time before install the blade to
ensure getting a good sectioning.
2
1
3
4