Amos AEM 460, Руководство по эксплуатации, Страница: 22 / 31

AEM460 Semi-automatic Microtome
AMOSAEM460OP20180306
---17---
⊙
Memorized coarse feed value and fast reload the next specimen
The feature is available for section more quantity cassettes in
one time which help to save the reload new specimen
trimming time and improve efficiency.
The Operations:
Clamp one new specimen and lock the knife holder, adjust
the specimen to close the cutting edge while press to
memorize the position and go with buzzer rings. When reload
next new specimen, press . the specimen move to the last
memorized position automatically.
Notes
，
To start coarse feed, the specimen must upper than
cutting edge, otherwise the light up and alarm
you the wrong operation.
●
Attention
：
1.Must use standard specimen holder and standard
cassette without any exceed paraffin
2. Don’t move the knife holder during the whole operation.
4.6 Sectioning
⊙
Sectioning setting
Press button while LED light up
，
the sectioning
function be activate.
Press to select the sectioning thickness value displayed
on .
⊙
Sectioning
Turn Handle the right handwheel to sectioning.
To obtain a best section that need a high quality Microtome and a best blade, the following
factors are also very important:
a
、
The hardness of the specimen
b
、
The angle of the cutting blade
c
、
If the blade is clamped tightly
d
、
If the specimen is clamped tightly.
To obtain a best section , first adjust a proper angle of the cutting blade and the specimen, the
smaller the angle , the smaller the section compressed. And the harder the specimen the larger the
angle. If the section is still not good, please try to increases the angle from zero.