Amos AEM 460, Руководство по эксплуатации, Страница: 20 / 31

AEM460 Semi-automatic Microtome
AMOSAEM460OP20180306
---15---
4.4
Specimen Clamps/Knife Inserting
Specimen Clamp
The specimen Clamp is available two
kinds
：
Specimen clamp
（
1
）
and Quick release
cassette clamp
（
2
）
.
Specimen clamp
：
Put the specimen (4) into the clamp (1) as
it showed in the drawing. And then clockwise
rotate the knurled screw (3) to tighten the
clamp. And take down the specimen by
rotating the knurled screw counterclockwise.
Quick release cassette clamp:
Push the lever (5) as the direction showed in
the drawing to open the clamp(2), while put
the specimen (6) into. and then free loosen
lever (5), the specimen will be clamped
automatically. To take down the specimen,
just operate as above.
Easy to change the specimen by one
hand operating the quick release cassette
clamp.
●
Always clamp the specimen before install
the blade to avoid causing injury.
Blade
Inserting
Loosen the lever 1 (10), and then pull the
blade (8) into the knife holder (7) as
drawing shows direction, and then rotate the
lever 1 (10) to clamp the blade.
There are two kinds of blade can be used
in the instrument: the Low disposable blade as
it is showed in the picture and the High
disposable blade.
If use HP blade, just loosen the two
screws on the blade plate (9) to take out the
base plate that is okay.
7
8
10
9
1
3
4
(1)
2
6
5
(2)