Ammasso 1100 Скачать руководство пользователя страница 66 | Manualshive

Страница: 66 / 66

Ammasso 1100 Скачать руководство пользователя страница 66

66

AMMASSO'S TOTAL LIABILITY FOR ALL CLAIMS UNDER THIS AGREEMENT
SHALL NOT EXCEED THE PRICE PAID FOR THE PRODUCT. THESE LIMITATIONS
ON POTENTIAL LIABILITIES WERE AN ESSENTIAL ELEMENT IN SETTING THE
PRODUCT PRICE. AMMASSO NEITHER ASSUMES NOR AUTHORIZES ANYONE
TO ASSUME FOR IT ANY OTHER LIABILITIES.

Critical Control Applications: Ammasso specifically disclaims liability for use of the adapter
product in critical control applications (including, for example only, safety or health care
control systems, nuclear energy control systems, security or defense systems, or air or ground
traffic control systems) by Licensee or Sublicensees, and such use is entirely at the user's risk.
Licensee agrees to defend, indemnify, and hold Ammasso harmless from and against any and
all claims arising out of use of the adapter product in such applications by Licensee or
Sublicensees.

Software: Software provided with the adapter product is not covered under the hardware
warranty described above. If the Software has been delivered by Ammasso on physical media,
Ammasso warrants the media to be free from material physical defects for a period of ninety
(90) days after delivery by Ammasso. If such a defect is found, return the media to Ammasso
for replacement or alternate delivery of the Software as Ammasso may select. Software
licenses for the Ammasso 1100 Ethernet Adapter can be found at www.ammasso.com, or
with the Ammasso software.

«
...
64
65
66

Содержание 1100



































































Отзывы:

Нет отзывов