manualshive.com logo in svg

Ammasso 1100, Руководство пользователя, Страница: 65 / 66

Поделиться
Скачать
Ammasso 1100 Скачать руководство пользователя страница 65

 

65 

 

 

Appendix B: Warranty 

 
 
Ammasso High Performance Server Adapter 
 
 
LIMITED LIFETIME HARDWARE WARRANTY 
 
Ammasso warrants to the original owner that its adapter product will be free from defects in 
material and workmanship. This warranty does not cover the adapter product if it is damaged 
in the process of being installed or improperly used.  
 
THE ABOVE WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, WHETHER 
EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT LIMITED TO ANY 
WARRANTY OF NONINFRINGEMENT OF INTELLECTUAL PROPERTY, 
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, SPECIFICATION, 
OR SAMPLE. 
 
This warranty does not cover replacement of adapter products damaged by abuse, accident, 
misuse, neglect, alteration, repair, disaster, improper installation, or improper testing. If the 
adapter product is found to be defective, Ammasso, at its option, will replace or repair the 
hardware product at no charge except as set forth below, or refund your purchase price 
provided that you deliver the adapter product along with a Return Material Authorization 
(RMA) number along with proof of purchase, either to the reseller from whom you 
purchased it with an explanation of any deficiency. If you ship the adapter product, you must 
assume the risk of damage or loss in transit. You must use the original container (or the 
equivalent) and pay the shipping charge. 
 
Ammasso may replace or repair the adapter product with either new or reconditioned parts, 
and any adapter product, or part thereof replaced by Ammasso becomes Ammasso property. 
Repaired or replaced adapter products will be returned to you at the same revision level as 
received or higher, at Ammasso's option. Ammasso reserves the right to replace discontinued 
adapter products with an equivalent current generation adapter product. 
 
LIMITATION OF LIABILITY AND REMEDIES  
 
AMMASSO'S SOLE LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION 
AND USE OF THE ADAPTER SHALL BE LIMITED TO DIRECT, OBJECTIVELY 
MEASURABLE DAMAGES. IN NO EVENT SHALL AMMASSO HAVE ANY 
LIABILITY FOR ANY INDIRECT CONSEQUENTIAL, INCIDENTAL, OR SPECIAL 
DAMAGES, REPROCUREMENT COSTS, LOSS OF USE, BUSINESS INTERRUPTIONS, 
LOSS OF GOODWILL, OR LOSS OF PROFITS, WHETHER ANY SUCH DAMAGES 
ARISE OUT OF CONTRACT NEGLIGENCE, TORT, OR UNDER ANY WARRANTY, 
IRRESPECTIVE OF WHETHER AMMASSO HAS ADVANCE NOTICE OF THE 
POSSIBILITY OF ANY SUCH DAMAGES. NOTWITHSTANDING THE FOREGOING, 

Содержание 1100



































































Отзывы:

Нет отзывов