User Manual for AML Oceanographic Minos SVP
13
Periodic Maintenance
Periodic maintenance will prolong the life of the instrument. The following is recommended:
•
If the instrument is very dirty or oily use warm soapy water and allow the instrument to
soak before cleaning with a rag or soft brush. Rinse with fresh water.
•
Before each use
o
Check the battery voltage (a fully charged battery will be approximately 8.3 volts, a
low battery will be less than 7.1 volts)
o
Check the tightness of swappable sensors
o
Check for nicks and cuts on the cable
•
After each use
o
Clean and rinse the instrument using fresh water
o
Dry and safely store the instrument
o
Partially charge the batteries if storing the instrument for long periods
•
Monthly
o
Lightly lubricate the connector contacts with 3M silicone spray or equivalent
o
Lubricate the retainer rings with silicone grease
•
Yearly
o
Send the instrument or Xchange™ sensors to a service centre for diagnostics and
re-calibration
