User Manual for AML Oceanographic Minos SVP
10
Changing the Lithium-Ion Battery Pack
It is sometimes more efficient to swap a depleted battery pack with a charged battery.
A spare battery and charge connector can be ordered with the product code CSE-0013.
CSE-0013 - Spare battery and charge connector
To change the battery pack:
•
Charge the spare battery.
o
Plug the charge connector into the battery. Ensure the correct polarity! The latch
on the connector will engage.
o
Plug the charger into the charge connector.
o
Plug the charger into a 120 or 240 volt AC outlet and allow the instrument to
charge until the red charging light on the charger turns green. A full charge
requires approximately 5 hours, however, the battery will reach 80% capacity
within 2 hours.
The charger must be connected to the battery before plugging the charger into the AC
outlet for proper operation of the charger and charging light.
Charging the spare battery
