27
V
. TEST RUN
1. Adjust safety cable
Lifting the carriages and lock at the same height, strain the safety cable and then
release a little, and then tighten the cable nuts. Make sure the safety device can
always be worked properly.
2.
Balance the machine
This machine use hydraulic balance adjustment way.
A.
Turn the handle to the position as
Fig.42
, push
UP
button, lifting the powerside
carriage to highest. Then turn the handle to another side as
Fig.43
, push UP button,
lifting the offside carriage to highest.
B.
Turn back the handle to the position as
Fig.42
, and open the safety device, press
the release handle, low down the carriage to the bottom.
C.
Turn the handle to the position as
Fig.43
, continues press the release handle until
the inside air all come out. Then turn back the handle as
Fig.42,
push
UP
button. If
both side of the carriage lifting at the same time it means balance adjustment
finished. If still not synchronization, turn the handle to the position as
Fig.43,
fill oil.
D.
Reply the above steps several times, until the machine balance.
Fig. 42
Fig. 43
Содержание HS-12
