S-4000 LT
1-50
Revised 10/2004
e-mail: [email protected]; [email protected]; website: www.amfreece.com
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
Warning:
-
Check for damage to electrical cables
-
Check safety covers for damage and replace if needed immediately
-
Keep your hands out of the sewing area
-
Do not modify the machine in any way, which could eliminate safety parts
-
Do not attach external lights or other devices to the machine´s electrical system
Caution:
-
Do not neglect periodic maintenance.
-
If you have fault in electrical power supply, switch off the operating switch (circuit
breaker).
-
Do not damage, correct and remove safety labels.
-
Do not work with the machine when you are under the influence of the drugs or
alcohol.
-
User has to ensure the lighting of the working area minimal 750 Luxes.
1 .
M AC H I N E C L E A N I N G A N D M A I N T E NA N C E
1.
Switch the power off and disconnect air supply.
2.
For cleaning and oiling, remove the cover
➊
and take out the clamp feet mechainsm
➋
.
Clean the clamping area from the fabric and thread lints.
3.
Open the needle bar cover
➌
and clean the thread lints from the guides
➍
and thread tension
➎
.
4.
Clean the thread lints and fabric from the sewing area - throat plate, loopers.
5.
Lubricate the machine according to the section G 4.
F - MACHINE MAINTENANCE