AMF REECE S-4000 LT, Руководство по эксплуатации и ремонту, Страница: 31 / 82

S-4000 LT
1-19
Revised 10/2004
e-mail: service@amfreece.cz; parts@amfreece.cz; website: www.amfreece.com
Phone: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
1. Max speed - maximal speed. Range
1500-3800
spm.
2. Slow strt - selecting Yes / No .
3. Slow stitch - selecting the number of stitches in slow start. Range 1-3 .
4.
Slow speed
- setting the slow start speed at the beginning of the sewing cycle. Range
500-1000 spm.
5. Ndl Up pos - correction of the needle bar upper position. Range
200 - 600
imp.
6. D off delay - draw-off delay. It is possible to set it in range 60—150 ms.
7. D off time - timing of the knife/draw-off activation. It is possible to set it in range 30-200 ms.
8.
Trim delay
- setting the trim delay. Ti is possible to set it in range 0 - 200 ms.
9. Trim time - setting the trim timing activation. It is possible to set in range 30 - 60 ms.
10. Thrd Puller - setting the thread blowing activation duration is possible to set 500 — 700 ms.
11. Cycle delay - setting the delay between the sewing cycles. Cycling parameter must be activated. It
is possible to set it in range
500-2500 ms.
12. Cycling - setting the machine cycling. It is possible to set
Yes / No
.
13. Pedal - setting the foot pedal position. Possible setting 1 step / 2 steps .
14. Double Sew - setting the number of buttonhole repeat. It is possible to set 1 cycle / 2 cycle / 1 or
2=3
.
15. L count - life counter
16. Count Rst - counter restart
To return to the main screen, press key..
D - MACHINE CONTROLS