S-4000 LT
1-42
Revised 10/2004
e-mail: [email protected]; [email protected]; website: www.amfreece.com
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
1 6 . M AC H I N E H E A D C L A M P F E E T A D J U S T M E N T
1.
A d j u s t m e n t f o r c l a m p h e i g h t
Be sure that air supply is switch on and the clamp feet are opened. If clamp feet are not opened, push
the clamp Up / Down button.
a)
loosen the nut
➊
b)
turning the screw
➋
clockwise lowers the clamp feet mechanism
➌
to clamp mat
➍
.
c)
tighten the nut
➊
N O T E :
Correct height is when the underside of the clamp feet are slightly lower than the point of the
needle in the home position.
2.
A d j u s t m e n t o f t h e d is t a n c e b e t w e e n t h e c l a m p f e e t
-
turn off the air supply
-
move the clamp to the clamping position manually and check, if clamp slot is in the center
of the slot on the clamping washer
-
if not, loose the screws
➎
and move to the required position, tighten the screws
➎
-
turn on the air supply
E - MACHINE ADJUSTMENTS
Î
Ê
Ë
Í
Ì
Ì