A
B
B
A
S-311+I
1-22 I
Released: 01/2014
E-mail: [email protected]; webside: amfreece.com
Phone: +420 582 309 146; Fax: +420 582 360 606
E - STANDARD MACHINE ADJUSTMENT
2. SETTING UP MINIMAL PLAY BETWEEN INDEXER FEET AND CLAMPING MAT
It is important to set up the minimal play between Indexer feet
1
and clamping mat
2
. correctly so that the spreading
mechanism on the sewing head operates correctly. It is necessary to hold the minimal play.
2.1. Check, whether the play on the machine is set onto 2mm in both positions of the Indexer. Use this
display buttons
to make a move.
2.2. If the 2-mm distance is not adjusted on the
machine, loose screws
3
and move sensors
4
into the required position. The distance increases in
the direction of A and decreases in the direction of
B.
2.3. Secure the setting by tightening screws
3
.
2.4. Check the setting by pressing the button .
The device must move freely without stopping.
Note:
If the distance is smaller than 2 mm, the fabric will
not be properly stretched during sewing an eye!