S-311+ ACL
1-21 ACL
Released: 01/2014
E-mail: [email protected]; webside: amfreece.com
Phone: +420 582 309 146; Fax: +420 582 360 606
D - OPERATING THE MACHINE FUNCTIONS
5.2. USING THE PROGRAMMED BUTTONHOLE IN CYCLE MODE WITH OPTICAL SENSOR ACTIVATED:
Example
: You wish to sew buttonholes in program no
1
in this order:
1,1,1,2.
1. Press the key for
setting up the program number
.
Numerical keypad appears. Select the program number
1
and confirm
.
2. Press the key
.
The display shows the screen where you can select only two types of buttonholes. The hole number one is always
automatically pre-set as a button hole, the second as a lapel hole. Press the first number and by the keypad select
the hole number
1
which is to be sewn first. Confirm by pressing
ENT
. Then press the second key and select the next
hole number in order
2
.
Cycle mode screen with optical sensor activated
3. Press
to save the buttonholes set up in the program
1
.
Go back to main screen
.
4. The display shows the number of program
1
and the number of buttonhole
1
,
which is to be sewn first.
5. Once the buttonholes
and
are finished, the buttonhole number changes into the next one that is to be
sewn
, it means
2
.
6. If threads breaks during sewing any buttonhole, it is not necessary to re-set the buttonholes in the cycle mode with
Stopped
and
Stopped
keys. The optical sensor automatically identifies the type of buttonhole that is being sewn by initial
placement of the workpiece into the machine. The buttonhole type changes on the display once the pedal is pressed.
The indication on the display provides information to the operator which buttonhole is to be sewn.
The machine will sew a lapel hole,
the machine will sew a button hole.