manualshive.com logo in svg

Ametek LMM01, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
Ametek LMM01 Скачать руководство пользователя страница 19

 

 

 

 

Operation

 
 
 

 

SPECTROCHECK — 07.05.2015  

— 19

 

 

7.2 

Switching the instrument off 

 

 

 

Note 

If possible, leave the instrument on all the time, this means, never shut off the 
power supply and keep the argon supply always open. 

If the instrument was disconnected from the power supply and/or removed from the 
argon supply for some time (due to transport/storage), stabilization may require a 
longer period of time after switching the instrument on. In this case, additional 
important information can be found in „SPECTROCHECK Instructions“ (F1/Help).  

 

To switch off the instrument, proceed as follows: 

1. 

Exit the spectrometer program "Spark Analyzer Pro CHECK". 

 

The program is switched off. 

2. 

Moved to the upper right-hand corner and click on the user name. 

3. 

Go to the menu item "Shut Down" and confirm the dialog box by clicking on 
"Shut Down" again. 

 

The computer is turned off. 

4. 

In order to switch the instrument completely off, remove the power plug. 

5. 

Close the argon supply line. 

 

The instrument is switched off. 

 

 

 

Содержание LMM01






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды