Safety
SPECTROCHECK — 07.05.2015
— 11
3.2 User
information
Compliance with all safety precautions is mandatory. It's for your own safety.
Only carry-out only operator maintenance work that is described in chapter 8
of the operating instructions. The operating personnel is not permitted to
proceed with any other maintenance work. Any further services (e.g. technical
maintenance) or repairs must only be performed by service personnel that are
authorized by the manufacturer.
While operating and maintaining the instrument, compliance with all safety
and accident prevention regulations is mandatory. This regulation is, for
example, DIN EN 61010 or any other comparable national standard.
The safety measures must be checked following every technical maintenance
or repair activity. This check must be performed according to VBG4/DIN EN
61010 or a comparable national standard.
Compliance with the maintenance schedule specified by the manufacturer is
mandatory. All maintenance activities must be recorded. This will maintain the
operational safety of the instrument.
Never tamper with the safety devices! If it is suspected that a safety device
does not work properly, shut down the instrument immediately. Please
contact your Service Center.
Compliance with the information labels on the instrument is mandatory.
Only genuine spare parts must be used when repairing the instrument. The
use of non-genuine spare parts will make the CE Declaration of Conformity
null and void.
The instrument may only be connected to the mains power supply with a
protective grounding conductor.
The instrument may be operated only in a dry environment (protection class
IP 20, DIN 40050).
If an instrument is positioned on a sloped surface and equipped with wheels,
it may roll away during the operation. Secure the instrument while in
operation. This applies also when the instrument is being transported.
Compliance with the relevant safety regulations when using tools and
operating equipment is mandatory.
The instrument is only completely disconnected from power if the power plug
is removed.
