manualshive.com logo in svg

Ametek LMM01, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
Ametek LMM01 Скачать руководство пользователя страница 18

 
 

Operation 

 

 

 

— 18 

SPECTROCHECK — 07.05.2015

 

7 Operation 

 

7.1 

Switching the instrument on 

 

 

 

Note 

If possible, never shut off the power supply and keep the argon supply always 
open. 

If the instrument was disconnected from the power supply for some time (overnight 
or during the weekend) and/or removed from the argon supply, the instrument 
must be stabilized for approx. 3 hours after switching it on. 

If the instrument was disconnected from the power supply and/or removed from 
the argon supply for some time (due to transport/storage), stabilization may require 
a longer period of time after switching the instrument on after switching the 
instrument on. In this case, additional important information can be found in 
„SPECTROCHECK Instructions“ (F1/Help).  

 

To switch on the instrument, proceed as follows: 

1. 

Connect the instrument to the power supply. 

 

The operating system is started. 

 

Once the operating system is booted, the spectrometer program "Spark 
Analyzer Pro CHECK" starts. 

 

The instrument is switched on. 

 

 

 

Содержание LMM01






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды