AmeriWater CENTURION 1500+, Руководство по эксплуатации

Страница: 21 / 52

16
Status
Break
Tank
Inlet
Solenoid
Stop
Button
RO Pump
Function
Drain
Solenoid
RO Module
Permeate
Solenoid
STOP
RO
PROCESSING
15.09.09 12:36
5.2.3 Stopping the unit during normal operation
To stop the unit at any time press the “ STOP ” button on the screen. If the unit has
been running for two hours or more, the unit will perform a shut-down flush which
directs a high concentrate flow across the membrane to the drain for 30 seconds.
After the 30 second shut-down flush the screen will revert to the “
Power On” display.
During the shut-down flush pressing the “ STOP ” button twice from the processing
screen will stop the unit immediately terminating the flush. (Refer to Section 3.5)
Warning: The supply mains isolation switch is located at the rear of the unit, ensure that is accessible
at all times and remains free from obstruction.
Ensure that the wall plug is accessible at all times as this can be used as a method of isolation.
5.2.4 Operation of screen function button
To access different performance values, while the mimic screen is displayed, press
the function button “

” at the top right of the screen. This will in turn, display
“Permeate Quality”, “Temperature”, “Flow Rate”, “Pump Pressure” , “Feed
Quality and “ Salt Rejection”.
5.3 Explanation of the mimic screen
This screen is displayed during normal processing.
Mimic screen