In
tr
od
u
c
tio
n
A
p
pe
ndi
x
Tr
o
u
b
les
ho
o
ting
Co
nfi
gu
rat
ion
Ho
m
in
g Clo
ck
Firm
w
ar
e
Up
dat
e
Fa
cto
ry
D
efau
lts
R
est
ore
B
u
tto
n
O
p
er
at
ion
In
st
allat
ion
S
p
ec
ifi
c
at
ions
© American Time
Wi-Fi Installation Manual
21
Factory Defaults Restore
American Time preconfigures your clock settings prior to shipment to you. These preconfigured settings are stored in
memory even after settings have been changed.
n
Note:
If your clock was not preconfigured at American Time, completing the factory defaults restore process will not
help. Refer to configuration section of this manual to reconfigure your clock.
To restore preconfigured settings complete the following process:
n
Note:
To restore factory defaults on digital clocks, see page 11,
Fig.5
.
1. Apply power to Wi-Fi module by inserting the barrel plug from the power source into the left side of the
Wi-Fi module where the power connection is located. If clock is currently running, go to step 3.
2. Verify the LED starts flashing red.
3. Wait for the LED to either stop flashing (Battery clock) or turn a solid color (Electric clock).
4. Press and hold the button located on the middle of the Wi-Fi module.
a. The LED should turn solid green to indicated the button press (continue holding the button).
b. Wait for the LED to flash orange one time (do not release the button).
c. Wait for the LED to flash orange twice (do not release the button).
d. Wait for the LED to flash orange three times (do not release the button).
e. Wait for the LED to flash orange four times.
5. Release the button.
a. Verify the LED alternates red/green.
6. Wait 20 seconds.
7. Power cycle Wi-Fi module by disconnecting barrel plug from the power source for 5 seconds and reconnecting.
AC
DC
To
wiring
box
AC
DC
To
wiring
box
