In
tr
od
u
c
tio
n
A
p
pe
ndi
x
Tr
o
u
b
les
ho
o
ting
Co
nfi
gu
rat
ion
Ho
m
in
g Clo
ck
Firm
w
ar
e
Up
dat
e
Fa
cto
ry
D
efau
lts
R
est
ore
B
u
tto
n
O
p
er
at
ion
In
st
allat
ion
S
p
ec
ifi
c
at
ions
© American Time
Wi-Fi Installation Manual
19
Homing Clock
If the clock is dropped it is possible for the clock hands to move from the correct placement. The Wi-Fi
module can tell the clock movement to go to 12 o’clock to verify hand placement is still correct.
1. To check hand placement complete the following process:
2. Apply power to Wi-Fi module by inserting the barrel plug from the power source into
the left side of the Wi-Fi module where the power connection is located.
3. Verify the LED starts flashing red.
4. Wait for the LED to either stop flashing (Battery clock) or turn a solid color (Analog clock).
5. Press and hold the button located on the middle of the Wi-Fi module.
a. The LED should turn solid green to indicated the button press (continue holding the button).
b. Wait for the LED to flash orange one time (do not release the button).
c. Wait for the LED to flash orange twice.
6. Release the button.
a. Verify the LED turns solid red.
b. Verify the LED turns solid orange.
c. Verify the LED flashes green.
7. Hands should begin moving rapidly within 30 seconds.
a. If not, remove power and start with step 1 again.
8. Wait for hands to stop moving (this may take up to 20 minutes).
9. Verify all three hands (second hand, minute hand and hour hand) stop at the 12 position.
a. If not, contact American Time technical support at
800-328-8996
.
10. Power cycle Wi-Fi module by disconnecting barrel plug from the power source for 5 seconds and reconnecting.
AC
DC
To
wiring
box
A - Red gear
locking pin
C - Battery pack
power input
Battery
Electric
B - LED
AC
DC
To
wiring
box
Power Source
AC
DC
To
wiring
box
AC
DC
To
wiring
box
