American Panel Blast Chiller AP40BC250-12 Скачать руководство пользователя страница 26

Страница: 26 / 42

PROGRAMMING

D.5.4. Parameter Programming For UV Cycle

The controller will ask the operator to choose an operating cycle. Press

to set the

parameters for the UV cycle.

Use

and

buttons to increase or decrease the amount of time in which the

Germicidal Lamp will be on.

Press

when done.

Note:

The UV cycle is an optional feature. Program the UV cycle only if the unit is equipped with a Germicidal Lamp.

D.5.5. Parameter Programming For Print Cycle

The controller will ask the operator to choose an operating cycle. Press

to set the

parameters for the print cycle.

Use

and

buttons to set the printer ON or OFF.

Press

when done.

Note:

If the print mode is ON, the printer will print events at preset time intervals. If the print mode is set , the events will

be saved in the controller’s memory.

Use

and

buttons to increase or decrease the time interval at which the

controller will save the events (status of the unit, time, air temperature, and food
temperature)

Press

when done.

Press

to exit programming mode.

Note:

The controller is able to save 250 operating events, approximately 72 hours of normal operation. To store the new

information the operator will have to clear the events memory.
(See chapter E.7)

Note:

The Printer is an optional feature. Program the Print cycle only if the unit is equipped with a Printer.

D.6. Programming The Alarms

The unit’s control panel is equipped with two types of alarm systems:

Food Probe Alarm

– it will sound when the food has reached the desired temperature, or when the food temperature is

too high. The Food Probe Alarm is informative only and it will not stop the unit.

Air Probe Alarm

– it will stop the unit in case the air temperature inside the cabinet goes out of the preset temperature

range. The Air Probe Alarm is a protective system. In case it does go off, the unit should be inspected and, when safe,
restarted.

Содержание Blast Chiller AP40BC250-12











































Результаты поиска

Содержание Blast Chiller AP40BC250-12

Отзывы:

Похожие инструкции для Blast Chiller AP40BC250-12

Бренды по названию

Популярные бренды

American Panel Blast Chiller AP40BC250-12, Руководство по установке и обслуживанию

Результаты поиска

Содержание Blast Chiller AP40BC250-12

Отзывы:

Похожие инструкции для Blast Chiller AP40BC250-12

Бренды по названию

Популярные бренды