American Landmaster 36V 200 Series, Руководство по обслуживанию

Страница: 27 / 31

15312 200 Series 36V
Power Checks: 36 V

If there is no 36 volt power, check the main 350 amp fuse and the 36 volt harness
fuse.

Check fuses first by looking at the piece of metal that runs through the glass. If it is
broken, replace the fuse. If it appears to be intact, confirm with the meter by setting
on the meter to “Ω” and placing a probe on each end of the fuse. The meter should
give a value close to Zero Ohms (0Ω). “OL” displayed will represent a blown fuse.

If still no power, check all connections (pins, wires, locations) same as you would for
the models with gas engines.
o
Relay plug (Blue or Black automotive relay).
o
ALL pins at ALL connectors of ALL harnesses are properly installed and in
the correct positions.
o
Check all splices in the harness

All connectors are fully inserted into the controller.

Check continuity of all wires and cables. Confirm with the meter by setting on the
meter to “Ω” and placing a probe on each end of the wire/cable. The meter should
give a value close to Zero Ohms (0Ω). “OL” displayed will represent a broken wire.
Main Fuse
36V Fuse
12V Fuse
Relay ( Blue or
Black)