American Landmaster 36V 200 Series, Руководство по обслуживанию

Страница: 25 / 31

15312 200 Series 36V

If it does not, check to be certain that the 36 volt circuit is wired properly.
Power to Throttle Switch

Use “V” setting on the meter.

Place one probe on the white wire of the Throttle switch and one probe to a good
chassis ground such as the negative (-) post at the 350 amp fuse.

Turn the ignition key to the “ON” position.

The meter should read 12 – 14 volts.
Controller Power from 36V Harness

Use “V” setting on the meter.
Meter Result
12 - 14V
(+) probe placement shown
(-) probe placement to any good
chassis ground
Safety Switch
(+) Probe Placement
>36 volts for the
battery system
(-) Probe Placement
To contactor
Main Fuse