American Landmaster 36V 200 Series, Руководство по обслуживанию

Страница: 15 / 31

15312 200 Series 36V
1. Jack the vehicle’s swingarm and place on jack stands to keep the rear wheels
off the ground. Do NOT use the Axle as a jack point.
2. Remove one of the rear wheel assemblies to give access to the preferred
side or removal.
3. Disconnect Main Fuse.
4. Disconnect battery wiring to all batteries.
5. Remove battery hold down nuts located underneath the battery rack.
6. Remove battery hold down.
7. Slide end battery out and remove from system. NOTE the orientation of the
battery as it is removed. Repeat for all others to be replaced.
To install one or more batteries:
8.
Slide battery into place, keeping its orientation correct, as shown here:
9. Install battery hold down.
10. Install battery hold down nuts.
11. Install wiring to batteries and Main Fuse as shown here:
12. Torque battery nuts to 8~10 ft-lbs (96~120 in-lbs).
13. Double-check all wiring, nuts, and battery orientation.