8
American Dryer Corp.
113235 - 5
B. LOCATION REQUIREMENTS
Before installing the dryer, be sure the location conforms to local codes and ordinances. In the absence of such
codes or ordinances the location
must conform
with the National Fuel Gas Code ANSI.Z223.1 LATEST
EDITION, or in Canada, the installation
must conform
to applicable Canadian Standards: CAN/CGA-B149.1-
M91 (Natural Gas) or CAN/CGA-B149.2-M91 (Liquid Propane [L.P.] Gas) or LATEST EDITION (for General
Installation and Gas Plumbing).
1. The dryer
must be
installed on a sound level floor capable of supporting its weight. Carpeting
must be
removed from the floor area that the dryer is to rest on.
IMPORTANT:
“The dryer
must be
installed on noncombustible floors only.”
2. The dryer
must not be
installed or stored in an area where it will be exposed to water and/or weather.
3. The dryer is for use in noncombustible locations.
4. Provisions for adequate air supply
must be
provided as noted in this manual (refer to
Fresh Air Supply
Requirements
in
Section D
).
5. Clearance provisions
must be
made from combustible construction as noted in this manual (refer to
Dryer
Enclosure Requirements
in
Section C
).
6. Provisions
must be
made for adequate clearances for servicing and for operation as noted in this manual
(refer to
Dryer Enclosure Requirements
in
Section C
).
7. The dryer
must be
installed with a proper exhaust duct connection to the outside as noted in this manual
(refer to
Exhaust Requirements
in
Section E
).
8. The dryer
must be
located in an area where correct exhaust venting can be achieved as noted in this
manual (refer to
Exhaust Requirements
in
Section E
).
IMPORTANT:
The dryer
should be
located where a minimum amount of exhaust duct
will be
necessary.
9. The dryer
must be
installed with adequate clearance for air openings into the combustion chamber.
CAUTION:
This dryer produces combustible lint and
must be
exhausted to the outdoors. Every
6 months, inspect the exhaust ducting and remove any lint build up.
IMPORTANT: The dryer
must be
installed in a location/environment, which the ambient
temperature remains between 40° F (4.44° C) and 130° F (54.44° C)
.
Содержание AD-285
Страница 48: ...ADC Part No 113235 5 07 10 08 7...
