ADJ Products, LLC - www.adj.com - Royal 3D II Instruction Manual Page 17
ADJ Products, LLC - www.adj.com - Royal 3D II Instruction Manual Page 18
Royal 3D II DMX Traits
Channel Value
Function
1
BLUE LASER
0 - 7 OFF
8 - 15 ON
16 - 239 STROBING SLOW - FAST
240 - 247 SOUND ACTIVE
248 - 255 ON
2
GREEN LASER
0 - 7 OFF
8 - 15 ON
16 - 239 STROBING SLOW - FAST
240 - 247 SOUND ACTIVE
248 - 255 ON
3 LASER ROTATION 1
0 - 127 0° - 360°
128 - 189 COUNTER - CLOCKWISE FAST - SLOW
190 - 193 NO ROTATION
194 - 255 CLOCKWISE SLOW - FAST
4 LASER ROTATION 2
0 - 127 0° - 360°
128 - 189 COUNTER - CLOCKWISE FAST - SLOW
190 - 193 NO ROTATION
194 - 255 CLOCKWISE SLOW - FAST
5 MACROS
0 - 7 NO FUNCTION
8 - 23 MACRO 1
24 - 39 MACRO 2
40 - 55 MACRO 3
56 - 71 MACRO 4
72 - 87 MACRO 5
88 - 103 MACRO 6
104 - 119 MACRO 7
120 - 135 MACRO 8
136 - 151 MACRO 9
152 - 167 MACRO 10
168 - 183 MACRO 11
184 - 199 MACRO 12
200 - 215 MACRO 13
216 - 231 MACRO 14
232 - 247 MACRO 15
248 - 255 SOUND ACTIVE
Fixture Cleaning:
Due to fog residue, smoke, and dust cleaning
the internal and external lenses should be carried out periodically to
optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the out-
side casing.
2. Clean the external optics with glass cleaner and a soft cloth every
20 days.
3. Always be sure to dry all parts completely before plugging the
unit back in.
Cleaning frequency depends on the environment in which the fixture
operates (I.e. smoke, fog residue, dust, dew). In heavy use we recom-
mend cleaning on a monthly basis. Periodic cleaning will ensure lon-
gevity, and crisp beam output.
Royal 3D II
Cleaning
Royal 3D II
Trouble Shooting
Trouble Shooting: Listed below are a few common problems that
you may encounter, with solutions.
No laser output from the unit;
1. Be sure you have turned “ON” the unit.
2.
Be sure the external fuse has not blown. The fuse is located on
the rear panel of the unit.
3. Be sure the fuse holder is completely and properly seated.
4. Be sure the unit is not in blackout mode.
Unit does not respond to sound;
1. Low frequencies (bass) should cause the unit to react to sound.
Tapping on the microphone, quiet or high pitched sounds may
not activate the unit.
Royal 3D II Fuse Replacement
Locate and remove the unit’s power cord. Once the cord has been
removed located the fuse holder located inside the power socket.
Insert a flat-head screw driver into the power socket and gently pry
out the fuse holder. Remove the bad fuse and replace with a new one.
The fuse holder has a built-in socket for a spare fuse be sure not to
confuse the spare fuse with active fuse.
