A6 OPERATING INSTRUCTIONS
05/12/16
4211-146
Page 6 of 11
Go to
Options
to set up various options available for use with you steamer.
Your AX steamer comes with two options automatically
loaded: a room light which always light during the steam
bath and remains on for 10 minutes after the bath stops (or
can be manually turned on and off) and a dedicated fan
control (set-up previously in the Systems menus).
You also have connections for three additional options of
your choice,
AUX 0, AUX 1
and
AUX 2
. These options use
a relay in the steamer as a switch connected to the Options
terminal block.
To add an option, select Options then select one of the Aux
items. Below, we’ll set Aux 0 for controlling Chromatherapy
lights.
In Aux 0’s menu, select the blank white block so you can name your option and the
keyboard will appear. Enter the name for your option then press the to accept the
name. The name can have up to 15 characters maximum (longer names may not
display properly).
Now select On/Off for the operation
needed then return to the options
menu.
A Fragrance option may be connect-
ed to inject aromatic oils into the
steam bath. If you wish to connect a
Fragrance system, set an AUX to
Fragrance and name the option.
If you need to set the pump timing for more or less fragrance,
use the fragrance menu to select how long the Pump injects the
aroma oil and how long the pump Stops between injections. Start
with the default settings and adjust for more or less fragrance as you get use to the effects. You do not want too
much fragrance, so start with a little and work your way up as needed
Now go to the Settings screen and you’ll see the
options added to the screen. When you start a bath,
Lighting will automatically turn on but the options will remain
off until you turn them on manually.
When the bath turns off, the options will be turned off automatically, too.
