A6 OPERATING INSTRUCTIONS
05/12/16
4211-146
Page 1 of 11
Amerec’s A6 control for the AX steamer
is a touch screen control intended to be mounted on a wall,
generally in or near the steam bath. It may be mounted directly on the wall surface or, using an optional recessed
mounting box, it may be mounted so its touch screen is almost flush with the
wall surface.
Using the A6, you set or adjust the steam bath time and temperature, control
options such as lights and fragrance pumps, and use Warm Start (if installed)
to keep the steamer’s water hot between baths so it produces steam more
quickly when the bath is started. Delayed start and calendar start settings
allow you to have a steam bath ready to use in a few hours or on a regular
schedule. Favorites save your preferred settings for later use. WiFi apps give
you wireless control from your Android phone and iPhone or while using a PC.
You can even prevent the steam room from being used during certain time
periods.
Intelligent steam control learns how long it should take your room to reach a
comfortable steam bath temperature then adds this time to your delayed starts
so you set when you want to start your steam bath and the bath will be up to
temperature and ready when you are.
You may use 1 to 3 controls with an AX steamer, including 1 or 2 A6 co an A3.
To reduce the risk of damage to the steamer or controls and to ensure the controls connect properly with the
steamer, always turn power off to the steamer before connecting or disconnect a control.
Index
Section
Page
Navigation
2
Turning Things On and Off
2
Start Up
3
Initial Set Up – Tools Menus
4
General
4
Limits
5
Additional Settings
5
System
5
Options
6
Favorites
7
WiFi
8
Apps
8
Available Languages in the A6
9
Warm Start: Is It Installed?
9
Mounting the Control
10
Recessed Mounting Template
11
For further assistance, contact
P.O. Box 2258, Woodinville, WA 98072
Phone 1-800-363-0251
1-425-951-1120
Fax 1-425-951-1130
eMail [email protected]
