A6 OPERATING INSTRUCTIONS
05/12/16
4211-146
Page 3 of 11
Start Up
The first time your A6 is turned on, it will need some information loaded and some settings changed.
When the power is first turned on, the steamer will take about 30 seconds to start operating before the A6 is
turned on. The A6 screen will then light and display the amerec logo, then change to a lit screen with spinning
circle showing while it loads its own software. This will take 1-1/2 minutes with one steamer and one A6. Multiple
steamers or multiple controls can make everything take a little longer while all the software loads.
The first thing you will see is the Welcome screen. Now press the Change Menu button to move to the Language
selection menu and select your language, then to the Region menu and select North America, then to the Date
Format menu, and then set the current date. Next set the Time format, then the current time.Now change menus
again and you will see the Home screen. (Note: page 9 for a list of all available languages.)
Note:
at this point, the room temperature may not be accurate yet. As the A6 measures the actual temperature,
the display will increase until the correct temperature is reached. After this the temperature display will change
quickly, as expected.
Press the > to set the time.
When the time is set,
press > again
to finish the set-up and
go to the home screen.
