AMD PCM-5862 Скачать руководство пользователя страница 80

Страница: 80 / 99

PCM-5862 User‘s Manual

Installing PC/104 modules

The PCM-5862's PC/104 connectors give you the flexibility to
attach PC/104 expansion modules. These modules perform the
functions of traditional plug-in expansion cards, but save space and
valuable slots. Modules include:

• PCM-3290

GPS Module

• PCM-3810

Solid State Disk Module

• PCM-3820

High Density Flash Disk Module

• PCM-3110A PCMCIA Module
• PCM-3110B Secondary PCMCIA Module with 1 FDD
• PCM-3610

Isolated RS-232 and RS-422/485 Module

• PCM-3718

30 kHz A/D Module

• PCM-3724

48-Channel DIO Module

• PCM-3680

Dual Port CAN Module

Installing these modules on the PCM-5862 is quick and simple.
The following steps show how to mount the PC/104 modules:

1. Remove the PCM-5862 from your system paying particular

attention to the safety instructions already mentioned above.

2. Make any jumper or link changes required to the CPU card

now. Once the PC/104 module is mounted, you may have
difficulty in accessing these.

3. Mount the PC/104 module onto the CPU card by pressing the

module firmly but carefully onto the mounting connectors.

4. Secure the PC/104 module onto the CPU card using the four

mounting spacers and screws.

Содержание PCM-5862




































































































Результаты поиска

Содержание PCM-5862

Отзывы:

AMD PCM-5862, Руководство пользователя, Страница: 80 / 99

Результаты поиска

Содержание PCM-5862

Отзывы: