manualshive.com logo in svg

AMD PCM-5862, Руководство пользователя, Страница: 28 / 99

Поделиться
Скачать
AMD PCM-5862 Скачать руководство пользователя страница 28

22

PCM-5862 User‘s Manual

IR connector (CN12) (U23 Super I/O chipset
ITE 8661 only)

This connector supports the optional wireless infrared transmitting
and receiving module.  This module mounts on the system case.
You must configure the setting through BIOS setup.

Audio interfaces (CN8, CN13)

The PCM-5862 is equipped with a high quality audio interface,
which provides 16-bit CD-quality recording and playback as well
as OPL3 compatible FM music. It is supported by all major
operating systems and is 100% Sound Blaster Pro compatible.

Audio connector (CN13)

The PCM-5862 provides all major audio signals on a 16-pin flat-
cable connector, CN13. These audio signals includes Microphone
in (mono), Line in (stereo), Line out (stereo), Speaker out (stereo).
You will need an adapter cable if you use traditional telephone
jack connectors for these audio signals.

CD audio input connector (CN8)

All CD-ROM drives can provide analog audio signal output when
used as a music CD player. The CN8 on PCM-5862 is a connector
to input CD audio signal into the audio controller. The audio cable
of your CD-ROM drive will be used to connect to CN8.

Содержание PCM-5862




































































































Отзывы:

Нет отзывов