manualshive.com logo in svg

AMD PCM-5862, Руководство пользователя, Страница: 70 / 99

Поделиться
Скачать
AMD PCM-5862 Скачать руководство пользователя страница 70

64

PCM-5862 User‘s Manual

Installation Notes

1. During the installation of this driver, DISPLAY.LOG and

DSPINSTL.LOG files are created in \OS2\INSTALL directory.
These files identify the OS/2 system files that were updated,
and indicate whether the installation was successful.  The
DISPLAY.LOG file also contains a string that identifies the
version of driver that was installed. This information may be
important when reporting an installation problem.

2. During installation, DSPINSTL will invoke the SVGA

Configuration program SVGA.EXE to determine the hardware
configuration, and create the file
\OS2\INSTALL\SVGADATA.PMI. If this file is not created,
the adapter will not be supported. When this step is done, the
display will be blanked, and you may see a series of flashes on
the display and/or what appears to be a “corrupted” display.
This is normal, as the configuration process is doing Video
BIOS mode sets to determine which screen resolutions BIOS
supports.  This configuration information is then used to
provide the System-Settings Resolution and Refresh selections.

Содержание PCM-5862




































































































Отзывы:

Нет отзывов