AMD PCM-5862, Руководство пользователя, Страница: 40 / 99

34 PCM-5862 User‘s Manual
VGA display software configuration
The PCM-5862’s on-board VGA interface supports a wide range
of popular LCD, EL, gas plasma flat panel displays and traditional
analog CRT monitors. With on-board 1M display memory, the
interface can drive CRT displays or color panel displays with
resolutions up to 1024 x 768 in 256 colors. It is also capable of
extending up to 2 MB of display memory to provide resolutions of
1024 x 768 in 64K colors.
The VGA interface is configured completely via the software
utility, so you don’t have to set any jumpers. Configure the VGA
display as follows:
1. Apply power to the PCM-5862 with a color TFT display
attached. This is the default setting for the PCM-5862. Ensure
that the AWDFLASH.EXE and *.BIN files are located in the
working drive.
NOTE: Ensure that you do not run AWDFLASH.EXE while
your system is operating in EMM386 mode.
2. At the prompt, type AWDFLASH.EXE and press <Enter>. The
VGA configuration program will then display the following:
VGA setup screen
3. At the prompt, enter the new BIN file that supports your
display. When you are sure that you have entered the file name
correctly, press <Enter>.