AMD PCM-5862, Руководство пользователя, Страница: 19 / 99

Chapter 2 Installation 13
CPU installation and upgrading
You can upgrade to a higher power Pentium processor at any time.
Simply remove the old CPU, install the new one, and set the
jumpers for the new CPU type and speed.
Warning! Always disconnect the power cord from your
chassis when you are working on it. Do not
make connections while the power is on as
sensitive electronic components can be
damaged by the sudden rush of power. Only
experienced electronics personnel should open
the PC chassis.
Caution! Always ground yourself to remove any static
charge before touching the PC board. Modern
electronic devices are very sensitive to static
electric charges. Use a grounding wrist strap at
all times. Place all electronic components on a
static-dissipative surface or in a static-shielded
bag when they are not in the chassis.
Install a CPU in the ZIF socket
PCM-5862 provides a Zero Insertion Force (ZIF) socket for easy
CPU installation.
1. Make sure the ZIF socket lever is in the upright position. To
raise the lever, pull it out to the side a little and raise it as far as
it will go.
2. Place the CPU in the empty socket. Follow the instructions that
came with the CPU. If you have no instructions, do the
following: Carefully align the CPU so it is parallel to the socket
and the notch on the corner of the CPU corresponds with the
notch on the inside of the socket. Gently slide the CPU in. It
should insert easily. If it doesn‘t, pull the lever up a little more.
3. Press the lever down. The plate will slide forward. You will
feel some resistance as the pressure starts to secure the CPU in
the socket. This is normal and won‘t damage the CPU.