AMD PCM-5862 Скачать руководство пользователя страница 10

Страница: 10 / 99

PCM-5862 User‘s Manual

system reset or IRQ15. Jumperless selection and software
enabled/disabled.

• Keyboard/Mouse connector: 8-pin header connector for keyboard and

PS/2 mouse

• USB interface: Two USB connectors with fuse protection. Compliant

with USB Spec. Rev. 1.0 (option)

• PC/104 expansion: 104-pin 16-bit PC/104 module connector

• I/O bus expansion: One 32-bit PCI bus expansion slot

PCI SVGA/flat panel interface:

• Chipset: C&T 65550

• Display memory: 1 MB on-board memory, supports up to 2 MB

• Display type: Simultaneously supports CRT and flat panel (EL, LCD

and gas plasma) displays

• Display resolution: Supports non-interlaced CRT and LCD display up

to 1024x768@256 colors with 1MB on-board display memory

Audio function:

• Chipset: ESS 1868/1869

• Audio controller: 16-bit codec, Sound Blaster Pro compatible

• Stereo sound: Full-duplex, integrated 3D audio

• Audio interface: Microphone in, Line in, CD audio in; Line out,

Speaker out

• Power: A12 V source for improved audio quality

PCI Bus Ethernet Interface:

• Chipset: REALTEK RTL8029 PCI local bus Ethernet controller

• Ethernet Interface: Novell NE2000 compatible 10BaseT interface.

Includes software drivers & boot ROM

Mechanical and environmental

• Max. power requirements: 7A @ 5V (4.75V to 5.25V)

Содержание PCM-5862




































































































Результаты поиска

Содержание PCM-5862

Отзывы:

AMD PCM-5862, Руководство пользователя, Страница: 10 / 99

Результаты поиска

Содержание PCM-5862

Отзывы: