AMD PCM-5862 Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 99

AMD PCM-5862 Скачать руководство пользователя страница 1

Copyright Notice

This document is copyrighted, 1997. All rights are reserved. The
original manufacturer reserves the right to make improvements to
the products described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in
this manual is intended to be accurate and reliable. However, the
original manufacturer assumes no responsibility for its use, or for
any infringements upon the rights of third parties that may result
from its use.

Acknowledgements

AMD is a trademark of Advanced Micro Devices, Inc.
Award is a trademark of Award Software International, Inc.
C&T is a trademark of Chips and Technologies, Inc.
Cyrix is a trademark of Cyrix Corporation.
IBM, PC/AT, PS/2 and VGA are trademarks of International
Business Machines Corporation.
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows

®

is a registered trademark of Microsoft Corp.

RTL is a trademark of Realtek Semi-Conductor Co., Ltd.
SiS is a trademark of Silicon Integration Systems Corporation
SMC is a trademark of Standard Microsystems Corporation.
UMC is a trademark of United Microelectronics Corporation.
VIA is a trademark of VIA Technology, Inc.

All other product names or trademarks are properties of their
respective owners.

Part No. 2006586200 1st Edition
Printed in Taiwan

May 1997

1
2
3
...
»

Содержание PCM-5862




































































































Отзывы:

Нет отзывов