33
Below is a description of the features in this menu:
No.:
Provides the order in which the IVS rules will be displayed in the menu.
Name:
Allows the user to customize a name for their rule. Double click the name in the Rule column to modify.
Rule Type:
This dropdown menu allows the user to select an IVS rule type (Tripwire or Intrusion).
Schedule:
Allows the user to set a schedule in which the IVS rule will be triggered.
Action:
These checkboxes allow the user to choose a parameter filter that will activate a trigger if an object were
to cross or appear in the set intrusion area.
Cross
: The rule will trigger when a target enters or exits the area.
Appears
: The rule will trigger when a target appears inside the area.
Direction:
This dropdown menu allows the user to choose whether the rule will be triggered if an object enters,
exits, or enters & exits a set line or area.
Object filter
: The object filter checkboxes allow the camera to be triggered only when a specific object, such as a
human or car, is detected by the camera. Both effective object checkboxes can be activated at the same time.
Human:
This checkbox allows the camera to be triggered only when a human figure is detected.
Motor Vehicle:
This checkbox allows the camera to be triggered only when a vehicle has been detected.
Record:
This checkbox allows the user to enable the camera to record video when an IVS event is triggered.
Record Delay
: This field specifies, in seconds, how long the delay between IVS events should be. The default is 10
seconds however this can be modified between 10~300 seconds.
Send Email:
This checkbox allows the user to enable the camera to send an email when an IVS event is triggered.
Snapshot
: This checkbox allows a snapshot of the IVS event to be sent via Email when triggered.
Draw Rule
: This option allows the user to use their mouse to customize (draw) a rule/area on the screen. This will
be the area or line in which an IVS rule will be triggered.
Clear:
This option is used to clear the drawn rule set on the live monitor screen.
Target filter:
Sets a maximum and minimum pixel size in which an event will be triggered.
Clear:
Clears the modified target area to draw the target area on the live monitoring screen
Draw Target:
Allows the user to set a target area on the live monitor screen.
An IVS event will not occur outside
the target box.
To reset to default settings, click the
Reset Defaults
button. To refresh the page, click the
Refresh
button. To save
the settings, click the
Save
button.
Setting an Intrusion Area
1.
Select Intrusion from the Rule Type drop down menu. Set a name for the rule by double clicking the mouse over
the Name of the rule.
2.
Click on
Setup
to set a schedule, set your periods (if any) and click
Save
to continue.
3.
In the
Action
menu, choose whether the rule will be triggered if an object appears or crosses the set region. Both
options can be enabled at the same time if needed.
3.
In the
Direction
menu, choose if the rule will be triggered if the object enters only, exits only, or enters & exits a
set region.
4.
Enable the
Record
checkbox to record the event.
7.
Check the
Send Email
and
Snapshot
checkboxes if you would like a snapshot of the event emailed to you. A valid
Email address must be established in the camera prior to enabling this setting. For more information on setting up
email alerts, please refer to section, “
SMTP (Email
)”.
5.
Click the
Draw Rule
option and right click on the live monitoring screen. Use the mouse to draw your initial line.
Once the initial line is set, right click the mouse again to continue drawing the region. Repeat the process and left
click the mouse to complete the region. Right click on the live monitoring screen when finished to set the rule.
