43
Below is an explanation of the features listed in this menu:
Preset:
A preset must be added to set a smart plan for Deep IVS or if multiple smart plans need to be applied to
the system. To begin adding a preset to your camera, click the
Add
button. To refresh the screen click
Refresh
, to
delete a preset, press
Delete
or to remove all the presets, click
Remove All
. Please note a
Tour
: Allows the user to
string multiple presets together.
Scan
: Allows the user to set automatic scan presets to the camera.
Pattern:
Allows the user to set specific PTZ pattern presets to the camera.
Pan:
Allows the user to adjust pan speeds related to established pan presets.
PTZ Speed:
Allows the user to adjust pan, tilt, and zoom speeds. There are 3 separate PTZ speeds for this function:
Low, Middle, and High.
Idle Motion
: Allows the user to set intervals of idle time before the preset quits. The idle time can be set from 1 ~
60 minutes.
Power Up:
Allows the user to set the device to automatically enable certain presets, such as tours, scans, etc. to
initiate once the camera has been powered on.
PTZ Limit:
Allows the user to set a specific area in which the PTZ move. This is possible by setting a Up and Down
line on the interface.
Time Task:
Allows the user to set scheduled periods for PTZ presets to occur. To set a schedule, click the
Enable
check box and select the time task action from the
Task Set action
menu. If you want the time task to
automatically return to a specific position in a certain period of time, enter the value in the
Auto Home
field. This
option is set to default every 30 seconds; however, this can be adjusted from 5 ~ 3600 seconds. Once this value is
set, click the
Scheduled
button:
