AMC AMC-1BXX, Руководство пользователя, Страница: 33 / 57

33
Table 5-9: Transmitter Alarm Sub-Menu Settings
Menu Item Description
Enable
elect this menu item to edit the alarm’s ena le state
Source
elect this menu item to edit the alarm’s source i.e. from the availa le sensors
Input
elect this menu item to edit the alarm’s input value
Level
elect this menu item to edit the alarm’s setpoint
Type
elect this menu item to edit the alarm’s t pe increasing or decreasing
Trigger
elect this menu item to edit the alarm’s trigger output (i.e. activate which relays)
Act Delay
elect this menu item to edit the alarm’s act delay in terms of seconds
Min Run
elect this menu item to edit the alarm’s minimum run time in terms of seconds
Exit Select this menu item to return to the Alarms sub-menu
f ‘Ena le’ is activated from the alarm su -menu, then the display will be updated to show the
following editing screen.
When the
ENTER button is pressed, the confirmation screen (described previously) is displayed.
f ‘ ource’ is activated from the alarm su -menu, then the display will be updated to show the
following editing screen.
The availa le options for ‘ ource’ is e ual to the list of sensors currently configured for the UTx.
The label for each sensor is dynamically assigned to S<n> : <Gas Label> where n represents
the sensor’s 1 ase inde and gas represents the sensor’s gas name in short form. For the
1BCO, the only source o
ption is thus " 1 ”.
When the
ENTER button is pressed, the screen will update to display the confirmation dialog
(described previously).
Ena le
ress Enter To ave
Ena le serves as a la el onl .
onte t sensitive help
efaults to the current value of the Ena le flag. se arro uttons to
toggle et een isa led and Ena led. ress E TER utton to confirm selection.
Ena le
ource
ress Enter To ave
ource serves as a la el onl .
onte t sensitive help
The source can e selected from a list of sensors. cle through all the values
using the
uttons.
1