AMC AMC-1BXX, Руководство пользователя, Страница: 31 / 57

31
When the
ENTER button is pressed, the screen will update to display the confirmation dialog
(described previously). If Yes is selected, the edit value is persisted as the new value for the
Zero Buffer for the selected sensor. Otherwise, the edit value is rejected. In either case, the
menu returns to the Sensor sub-menu menu wit
h the ‘Zero uff’ menu item selected.
f ‘ al Freq’ is activated from the sensor su -menu, then the display will be updated to show the
following editing screen.
The availa le options for ‘ al Freq’ are listed in the follo ing ta le.
Table 5-7: Calibration Frequency Configuration
Menu Item Description
Off Next cal due date is not calculated
3 Months Next cal due date is calculated as 3 months from last cal timestamp
4 Months Next cal due date is calculated as 4 months from last cal timestamp
6 Months Next cal due date is calculated as 6 months from last cal timestamp
12 Months Next cal due date is calculated as 12 months from last cal timestamp
When the
ENTER button is pressed, the screen will update to display the confirmation dialog
(described previously).
Zero uff
Enter To Adv ursor
Zero uff serves as a la el onl .
onte t sensitive help
Edit the alarm h steresis setpoint value one digit at a time using the uttons.
ress E TER to advance the cursor to the ne t digit.
ress E TER hen the last digit is highlighted to save the value.
al re
ress Enter To ave
al re serves as a la el onl .
onte t sensitive help
The cali ration fre uenc can e selected from a list of options using the
uttons to c cle et een each option. ress E TER to save the
selected options.
6 onths