Amberg Technologies AG Tunnel 2.0 - Tunnelscan Скачать руководство пользователя страница 45

Страница: 45 / 68

User manual

Analysis and reporting

Page 45 of 68

Figure 28. Profile export options

The

export profile wizard

will guide you through the process.

1. In the first step, set the profile measurement folder of the construction stage that should be

used for the export.

2. In the second step, select the stationing values where the profiles should be exported. Dif-

ferent options can be used.

Single stationing

Move the cursor in the 2D map view or input the value for the

stationing position where the profile should be exported

Stationing intervals

To export not only a single profile but a series of profiles you

can use this function. Input the values for the stationing posi-

tions where the profile should be exported.

■

Start stationing

: Input the start station for the range where

the profiles should be exported.

■

End stationing

: Input the end station for the range where

the profiles should be exported.

■

Interval

: Input the interval where the profiles should be cre-

ated.

Stationing list

Activate this function for the export of profiles at a predefined

stationing list. Select an ASCII file containing the profile posi-

tions. Each profile position must be listed on a new line. Ex-

ample:

512.000

513.000

514.000

515.000

516.000

Filter

Use

Filters

to generate profiles with fixed point spacing. There

are two options:

■

Fixed number of points

: Select how many points you want

have in each extracted profile.

■

Fixed point interspace

: Select the interspace (along the

theoretical profile) of the points in the extracted profile.

3. Specify the attributes that will be set for all exported profiles.

Содержание Tunnel 2.0 - Tunnelscan





































































Результаты поиска

Содержание Tunnel 2.0 - Tunnelscan

Отзывы:

Похожие инструкции для Tunnel 2.0 - Tunnelscan

Бренды по названию

Популярные бренды

Amberg Technologies AG Tunnel 2.0 - Tunnelscan, Руководство пользователя

Результаты поиска

Содержание Tunnel 2.0 - Tunnelscan

Отзывы:

Похожие инструкции для Tunnel 2.0 - Tunnelscan

Бренды по названию

Популярные бренды