Amberg Technologies AG Tunnel 2.0 - Tunnelscan, Руководство пользователя

Страница: 15 / 68

User manual Point cloud measurements
© Amberg Technologies, 2018 Page 15 of 68
3.2.1 Export measurement data to Amberg Navigator Tablet
To export data from Amberg Tunnelscan to Amberg Navigator Tablet , right-click on the
Project node in the Project tree and select Export to Amberg Navigator Tablet . Select a
filename and a target directory to save the *.at2nav file.
In the synchronisation process with Amberg Navigator Tablet , Amberg Tunnelscan
acts as the master. If data is exported to Amberg Navigator Tablet, the measured point
clouds are handled as described below.
■
All measured point clouds available in Amberg Tunnelscan are exported to the Am-
berg Navigator Tablet .
■
Measured point clouds imported from Amberg Navigator Tablet that were edited in
Amberg Tunnelscan will replace the original point cloud on the tablet.
■
Measured point clouds imported from Amberg Navigator Tablet that were deleted
in Amberg Tunnelscan will also be deleted on the tablet and no longer available for
evaluation there.
3.2.2 Synchronize measurement data with Amberg Navigator Tablet
3.2.2.1 Export measurement data to Amberg Navigator Tablet
To export data from Amberg Tunnelscan to Amberg Navigator Tablet , right-click on the
Project node in the Project tree and select Export to Amberg Navigator Tablet or Synchro-
nise with Amberg Navigator Cloud . Select a filename and a target directory to save the
*.at2nav file for the file export to Navigator Tablet. If the data transfer should be done via Navi-
gator Cloud connection, please define the Cloud synchronisation settings for the data trans-
fer in the project tree.
For more information, please see the Amberg Navigator or Amberg Navigator Tablet manual.
3.2.2.2 Read measurement data from Amberg Navigator Tablet
To read measured point clouds from Amberg Navigator Tablet , right-click on the Project
node in the Project tree and select Import from Amberg Navigator Tablet or Synchronise
with Amberg Navigator Cloud
. Select for import via file a *.nav2at file exported from
Amberg
Navigator Tablet to read the measured point clouds back to Amberg Tunnelscan. If the data
transfer should be done via Navigator Cloud connection, please define the Cloud synchroni-
sation settings
for the data transfer in the project tree.
For more information, please see the Amberg Navigator or Amberg Navigator Tablet manual.
3.3 Import measurement data
Open the Point cloud editor of the construction stage that the measured point clouds should
be assigned to. Use the Import button from the menu, the toolbar or the context menu to start
the Import point cloud data wizard . The wizard supports importing measurement data from
point cloud measurements. Select the data source according to your measurement data.