Amazone XTender 2200, Руководство по эксплуатации

Страница: 103 / 108

Cleaning, maintenance and repair
XTender BAG0158.2 03.18
103
The date of manufacture of the hydraulic hose line on the
assembly plus six years is decisive. If the date of manufacture
on the assembly is "2004", then the hose should not be used
beyond February 2010. For more information, see "Labelling of
hydraulic hose lines".
12.5.4 Installation and removal of hydraulic hose lines
When installing and removing hydraulic hose lines, always observe
the following information:
•
Only use genuine AMAZONE hydraulic hose lines!
•
Always ensure cleanliness.
•
You must always install the hydraulic hose lines so that, in all
states of operation:
ο
There is no tension, apart from the hose's own weight.
ο
There is no possibility of jolting on short lengths.
ο
Outer mechanical influences on the hydraulic hose lines
are avoided.
Use appropriate arrangements and fixing to prevent any
scouring of the hoses on components or on each other. If
necessary, secure hydraulic hose lines using protective
covers. Cover sharp-edged components.
ο
The approved bending radii may not be exceeded.
•
When connecting a hydraulic hose line to moving parts, the hose
length must be appropriate so that the smallest approved
bending radius is not undershot over the whole area of
movement and/or the hydraulic hose line is not over-tensioned.
•
Fix the hydraulic hose lines to the intended fixing points. There,
avoid hose clips, which impair the natural movement and length
changes of the hoses.
•
The coating of hydraulic hose lines is not permitted.